FREE & OPEN
THE OPEN PROTOCOL PLAYGROUND

Make every packet make sense.

Explore the conversations that connect our world. One packet at a time.

66 protocolsZero paywalls. Endless curiosity.

IEC 60870-5-104

Industrial & SCADAAdvanced

Start data transfer, interrogate a station and acknowledge counters.

SIMULATION01 / 05
Loading topology…
0.0s / 5.6s
01
STEP 1 OF 5Engineering station → Process controller

STARTDT act

A controlling station enables data transfer using a U-format control APDU.

#TIMESOURCE → DESTINATIONMESSAGE
0.000192.0.2.10192.0.2.20STARTDT act
1.400192.0.2.20192.0.2.10STARTDT con
2.800192.0.2.10192.0.2.20General interrogation
4.200192.0.2.20192.0.2.10Measured value response
5.600192.0.2.10192.0.2.20S-format acknowledgement
ISOLATED PROCESS SANDBOX

Tank & pump station

A local process model, separate from the fixed packet fixtures above.

42%
PLC onlineBROWSER ONLY

Start data transfer, interrogate a station and acknowledge counters.

Explain STARTDT act and distinguish it from S-format acknowledgement.

Prerequisites: TCP

Ready to test your understanding?

Rebuild the exchange. Read the fields. Find the mistakes.

IEC 60870-5-104: protocol guide / panduan protokol

Start data transfer, interrogate a station and acknowledge counters.

Mulai transfer data, interogasi station, dan akui counter.

Communication walkthrough / Alur komunikasi

  1. STARTDT act

    A controlling station enables data transfer using a U-format control APDU.

    Controlling station mengaktifkan transfer data memakai APDU kontrol format U.

  2. STARTDT con

    The controlled station confirms readiness.

    Controlled station mengonfirmasi kesiapan.

  3. General interrogation

    An I-format APDU carries C_IC_NA_1 with the interrogation qualifier.

    APDU format I membawa C_IC_NA_1 dengan qualifier interogasi.

  4. Measured value response

    Measured data follows activation confirmation; this condensed event shows a scaled tank input.

    Data ukur mengikuti konfirmasi aktivasi; event ringkas ini menunjukkan input tangki berskala.

  5. S-format acknowledgement

    The receive sequence acknowledges I-format APDUs, not the process value itself.

    Receive sequence mengakui APDU format I, bukan nilai proses itu sendiri.

Source and simulation scope

This is a simplified, deterministic teaching scenario. Timing is illustrative. Messages grouped within one event are explicitly condensed. Hexadecimal fixtures, where shown, contain only the indicated protocol ADU, not a full network capture. No PCAP files are supplied.

IEC 60870-5-104 · technical reference ↗